| From | Message |
blkquad
Dodge Dakota
JOIN HERE
12/05/2005
10:05:32
|
 Subject: KEYSTONE ram air hoods
IP: Logged
Message:
are the keystone ramair hoods for a 4.7 functional with the kit (direct ram air) or is there a kit where i don't have to have the airbox on the side of the engine. i like the twin hood but it dosent tell me if the hood for a 4.7 flows direcrly in the box or does it just intake air and blow it over the engine??
|
lonewolf
Dodge Dakota
JOIN HERE
12/17/2005
16:07:23
|  RE: KEYSTONE ram air hoods
IP: Logged
Message:
you could try writing keystone an email. although i did write them once though about a similar question. i have a K&N FIPK and i wanted to know if the functional twin scoop would work with it or if i would have to get their kit. they said that it should fit my FIPK, but i havent bought it yet. So, i assume that the hood deflects the air to the passenger side near the CPU in the 2003 dakotas. like i said though, might want to just give them a ring to be sure.
|
greg
Dodge Dakota
JOIN HERE
12/21/2005
11:59:37
| RE: KEYSTONE ram air hoods
IP: Logged
Message:
i have the keystone hood, but since i have the 3.9L they don't make a ram air box to connect to the hood. The air is vented to the side where my intake is...so I am kinda getting a partial ram air hood "action". It just not a direct connection. But no, the vents are to the intake side not the back. the only thing in the back is 2 small drain holes.
|
blkquad
Dodge Dakota
JOIN HERE
12/22/2005
19:57:09
| RE: KEYSTONE ram air hoods
IP: Logged
Message:
kewl thanx
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
