| From | Message |
DAKDOG
Dodge Dakota
JOIN HERE
7/09/2005
19:02:14
|
 Subject: 24# FMS injectors???????
IP: Logged
Message:
I bought some 24#ers for my 99 dakota r/t. But I think I should have bought 19#ers. My mods are;
cold air kit
relocated ait
hughes stage 2 intake
53 mm fastman t.b.
1.7 rr
guide plates/hardened pushrods
full custom exhaust
2800 stall converter
trans go kit
With these mods, which injectors should I use?
|
92Dak
Dodge Dakota
JOIN HERE
7/10/2005
00:19:29
| RE: 24# FMS injectors???????
IP: Logged
Message:
I think 19#ers would be fine for your application, most people who get the 24#ers have some sort of forced induction.
|
DAKDOG
Dodge Dakota
JOIN HERE
7/10/2005
16:20:58
| RE: 24# FMS injectors???????
IP: Logged
Message:
I forgot some things:
msd 6a box
accell cap, rotor, wires, and coil
superchips programmer
and I will be shooting a 50 hp shot of nitrous.
|
John Force
Dodge Dakota
JOIN HERE
7/10/2005
21:10:15
| RE: 24# FMS injectors???????
IP: Logged
Message:
19 pounders still apply.
|
N56629
Dodge Dakota
JOIN HERE
7/10/2005
22:07:58
| RE: 24# FMS injectors???????
IP: Logged
Message:
Without a cam, head work, gears and some headers, that intake, tb and 24# injectors must be killing your bottom end. If it wasn't for the 2800 stall, I think it would fall flat on its face.
|
crow318
Dodge Dakota
JOIN HERE
7/11/2005
09:29:50
| RE: 24# FMS injectors???????
IP: Logged
Message:
Hey Dakdog,
I just bought installed a procharger, and was thinking about getting some new Injectors. I was thinking either a set of matched 19# or 24#. If you end up going back to 19's, I might be interested in those 24's.
|
DAKDOG
Dodge Dakota
JOIN HERE
7/11/2005
13:42:48
| RE: 24# FMS injectors???????
IP: Logged
Message:
crow318
I paid $120.00 for them off ebay. I would be willing to sell them or trade for some 19#ers.
|
crow318
Dodge Dakota
JOIN HERE
7/11/2005
13:49:21
| RE: 24# FMS injectors???????
IP: Logged
Message:
I would trade for the 19's that I have on the truck now, the only problem is that it's a daily driver, and I would have to get the 24's before I could send out the 19's. It may be better for me to just buy a set, and then try and get rid of my old ones.
|
rgathright
Dodge Dakota
JOIN HERE
7/11/2005
14:55:53
| RE: 24# FMS injectors???????
IP: Logged
Message:
Here is what I have collected on fuel injectors in Dakota's:
http://www.reubengathright.com/DakFuelInjectors.html
Hope it helps.
|
DAKDOG
Dodge Dakota
JOIN HERE
7/12/2005
11:02:10
| RE: 24# FMS injectors???????
IP: Logged
Message:
rgathright
Thanks for the info. I am now looking at a set of 19#ers.
|
New Owner
Dodge Dakota
JOIN HERE
7/12/2005
15:23:26
| RE: 24# FMS injectors???????
IP: Logged
Message:
I know your talking about injectors but whats the deal with the 24# i used to be a certified machanic but that was before fuel injection days
|
DAKDOG
Dodge Dakota
JOIN HERE
7/13/2005
00:27:26
| RE: 24# FMS injectors???????
IP: Logged
Message:
That is how they measure the flow rate. I believe it means 24 lbs/per hour.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
