| From | Message |
DHmotorsports
Dodge Dakota
JOIN HERE
5/24/2005
23:49:18
|
 Subject: What do YOU need?
IP: Logged
Message:
Hey fellow enthusiasts.
We here at DHmotorsports are looking for your input on our next big project. What do you really want for your dak that is not yet being produced? Or what do you want that is already being produced but is way out of your price range? We are dedicated to designing and producing top quality dodge dakota speed parts and accessories. Anything you need we can make it. With a top notch metal fabricator, CAD expert, a very advanced precision die/tool maker and automotive machine shop there really is not much we cannot do. Lets here it guys, what do you THE CUSTOMERS want?
Thanks
www.dhmotorsports.net
|
another mark
Dodge Dakota
JOIN HERE
5/25/2005
00:59:35
| RE: What do YOU need?
IP: Logged
Message:
A better PCM for the 3.9
|
DHmotorsports
Dodge Dakota
JOIN HERE
5/25/2005
06:09:22
| RE: What do YOU need?
IP: Logged
Message:
Without backing from Chrysler that is an inpossible project. We will see what we can do though.
|
texasboy77904
Dodge Dakota
JOIN HERE
5/25/2005
08:53:02
| RE: What do YOU need?
IP: Logged
Message:
another suspension lift for the gen 3s!
|
DHmotorsports
Dodge Dakota
JOIN HERE
5/25/2005
11:53:31
| RE: What do YOU need?
IP: Logged
Message:
We can definitly do that!
ACtually we already have something in the works. Check the website for updates.
Thanks
www.dhmotorsports.net
|
me
Dodge Dakota
JOIN HERE
5/25/2005
12:51:36
| RE: What do YOU need?
IP: Logged
Message:
a less expensive Hotchkis TVS system....(knock-off)
complete headers AND y-pipe for a 2001 5.9L.....
|
Dakdog
Dodge Dakota
JOIN HERE
5/25/2005
13:02:15
| RE: What do YOU need?
IP: Logged
Message:
How about some 15X4 skinnies that will clear the front break rotors (R/T). with some 15X8's for the rear. The best price I can find is $1250.
|
N56629
Dodge Dakota
JOIN HERE
5/25/2005
13:11:52
| RE: What do YOU need?
IP: Logged
Message:
Hey, Dakdog, couldn't you have some 15" steel Durango spares reworked? If DHM has the equipment, it should be no problem narrowing them to 4-5 inches.
Right now I'm looking at a compromise in both size and price. I'm thinking Cragar 17x9 in the rear and 15x7 in the front for less than $400.
|
Idakota
Dodge Dakota
JOIN HERE
5/25/2005
16:04:44
| RE: What do YOU need?
IP: Logged
Message:
GOOD Suspension Lift for 03-04 Daks
Long Tube Headers for 4.7
Good Headlights Projector/HID
Tow Hook kit for Gen III Daks
|
ricardcapecod
Dodge Dakota
JOIN HERE
5/25/2005
17:54:02
| RE: What do YOU need?
IP: Logged
Message:
How about a 2in drop spindle for the gen 3 dak 2000?
QUESTION:
Will a 2in drop lower arm work as good (geometry wise) as a 2in drop spindle?
Which option is the better choice for a perfect alignament?
I also need some smaller bump stopers for my 2in drop coils and stiffer sway bars.
Thanks.
|
Zach
Dodge Dakota
JOIN HERE
5/25/2005
18:13:17
| RE: What do YOU need?
IP: Logged
Message:
People are asking all the time if there are turbo kits available for any of the Dakota engines. A single or twin turbo kit that could be priced for around $4,000 or under would definatly get some intrest.
|
NEW_SOL
Dodge Dakota
JOIN HERE
5/25/2005
18:16:49
|  RE: What do YOU need?
IP: Logged
Message:
How about a drum to disc conversion kit that quality and won't brake our wallets.
'00 4.7 2wd
|
Kaderdak
GenIII
5/25/2005
21:08:25
| RE: What do YOU need?
IP: Logged
Message:
How about a shiftable rear differential, you could have two different sets of ring gears and you could shift between like a 3.23 for highway cruisin and 4.11 for racing/off roading.
** '97 Dakota 5.2L 4x4 w/3.55(my best ebay purchase yet) **
** Homebrew CIA, Dynomax Catback, March Underdrive Pulleys, Transgo Kit **
** Borg Warner Brass Cap/Rotor to Taylor 8mm wires to NGK plugs **
** Homebrew dual electric fan setup with 180* thermostat **
** Sitting on BFG 31 x 10.50's **
** Tons more once I'm not a poor college student :) **
|
iLUVfatCHICKS
Dodge Dakota
JOIN HERE
5/25/2005
23:15:56
| RE: What do YOU need?
IP: Logged
Message:
how about food coupons to the sizzler. fat chicks taking all my mod money to feed them.
|
carmen
Dodge Dakota
JOIN HERE
5/25/2005
23:27:20
| RE: What do YOU need?
IP: Logged
Message:
rear mounted turbo
Well I just put the stainless steel brake disc brake upgrade and was happy with the results. I thought that the kit was fair and the instructions poor. they give you new brake lines but they are tooooo long and dont fit the distribution block.
now I can stop on a dime and looking for a rear mounted turbo. squires does not make a kit for dakotas. If you can bend the pipes and pick the correct turbo the rest is easy.
|
DHmotorsports
Dodge Dakota
JOIN HERE
5/26/2005
12:19:42
| RE: What do YOU need?
IP: Logged
Message:
Great ideas guys, keep them coming. Keep watching the website, we will need a few trucks for a test run of a few new products here very soon.
Thanks
www.dhmotorsports.net
|
Satakieli
Dodge Dakota
JOIN HERE
5/26/2005
13:05:04
| RE: What do YOU need?
IP: Logged
Message:
ALL FOR THE GEN 1s and 2s!
2" - 4" front drop
2" - 6" rear drop
Larger cross drilled and slotted rotors.
Rear Drum to disc conversion
Rear Traction Bars
Rear large diameter Sway bars.
Functional hood scoops and cowl induction hoods.
|
DHmotorsports
Dodge Dakota
JOIN HERE
5/26/2005
17:42:40
| RE: What do YOU need?
IP: Logged
Message:
Thanks for the input Satakieli. Pretty much all of those items you mentioned are already made and we here at DHmotorsports carry them with the lowest prices around!. If you have any questions or want to make a purchase just email me or call the 24hr tech support number listed on our website. There is usually atleast one operator and one tech standing by.
Thanks
dhmotorsports.net
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
