Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
02:50:53 - 12/29/2024

Dakota Performance
FromMessage
cali dak00
Dodge Dakota
JOIN HERE


5/07/2005
15:48:25

Subject: 4.7 superchip question/concern
IP: Logged

Message:
I guess I could read a couple of hundred posts and maybe find the answers to my questions/concerns but I don't have that much time in my life...LOL

I have a 00 QC 4x4 4.7 and purchesed a super chip. On the performance setting, when I get on it hard, the O/D off (overdrive) light comes on and stays on untill I turn the ignition off and then back on. It is working fine, but the light stays on even if it is in overdrive??

Also, SOMETIMES it will not bump down in to a lower gear when I punch it. Examples are: When I'm doing 20-25mph in 2nd gear and I stab it, SOMETIMES (sometimes it does other times not) it will not bump down in to 1st. It will just accelerate in 2nd gear at a low RPM?? The sane will happen at high speeds as well. When I'm doing 45 or so and I step on it SOMETIMES it will not down shift in to 2nd??

Anyone else seen this?




GraphiteDak
GenIII
 Email User Profile


5/08/2005
01:28:52

RE: 4.7 superchip question/concern
IP: Logged

Message:
Bummer.

Try doing the TPS mod and see if that helps. Maybe your factory setting is low. Raising it up to about .75VDC at idle (if I'm remembering right) will make it more responsive and downshift easier.



icmopar
Dodge Dakota
JOIN HERE


5/08/2005
12:15:21

RE: 4.7 superchip question/concern
IP: Logged

Message:
Program back to stock disconect neg. batt. cable hold key in start pos. for 15sc.
reinstall batt.cable start truck drive it and get up to op.temp then program the superchip again.



cali dak00
Dodge Dakota
JOIN HERE


5/08/2005
20:33:02

RE: 4.7 superchip question/concern
IP: Logged

Message:
Thanks. I will look into both of those sugestions



bump
Dodge Dakota
JOIN HERE


5/09/2005
18:08:54

RE: 4.7 superchip question/concern
IP: Logged

Message:
?



calidak00
Dodge Dakota
JOIN HERE


5/31/2005
23:28:00

RE: 4.7 superchip question/concern
IP: Logged

Message:
Well I tested the TPS and it was at .74 volts. I'm gona try reprograming back to stock then program back at temp and see what happens.

Thanks



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.