Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
02:26:10 - 12/29/2024

Dakota Performance
FromMessage
Weezing Dak
Dodge Dakota
JOIN HERE


4/12/2005
10:22:59

Subject: KRC 200 cams or KRC 206 cams
IP: Logged

Message:
I have a 04 Dak 4.7 QC 3.55 Auto 4X4 32" tires,with a homebrew CAI and true dual 2.5 exhaust with an X pipe. I am going to put a set of cams in my truck and I want the ones that will help it below 3500 the most, I realy don't care what it dose beyond 5500, but I need HELP on the bottom end! Thanks for the help



DSW
Dodge Dakota
JOIN HERE


4/12/2005
13:11:10

RE: KRC 200 cams or KRC 206 cams
IP: Logged

Message:
A bigger cam will move your power band to a higher RPM. Even the KRC 200 cams might not be the right answer for a 4x4 because you want your power band right off idle, not starting at like,,, 1200-1500 rpm.

Give KRC a call and ask them for thier recommendation for a 4x4.



Izzy
Dodge Dakota
JOIN HERE
 Email

4/12/2005
14:55:41

RE: KRC 200 cams or KRC 206 cams
IP: Logged

Message:
I am running the HO camS bought from KRC and I noticed a SIGNIFICANT amount of low-end power once they were installed. I added a Superchips tuner to that and together they make me very happy with my 2wd 104k mile 2000 CC.


KRC lists their low-end power cam as:

KRC 4.7L/200 Dual Overhead Camshafts

200/212-480/436 111 Camshafts designed for low-end and great midrange gains. This kit includes both left and right cams, the installation tool, and full installation instructions.




DSW
Dodge Dakota
JOIN HERE


4/12/2005
15:26:44

RE: KRC 200 cams or KRC 206 cams
IP: Logged

Message:
Doh,,, should have looked before I lept. The 200's are the low end cams good for 4x4's.

Izzy, which KRC cam grind did you go with?



Kowalski
GenIII
 User Profile


4/12/2005
15:42:19

RE: KRC 200 cams or KRC 206 cams
IP: Logged

Message:
I believe KRC's 200 cam is the same as the factory HO cams. Should be the best for your heavier QC; felt like more torque through the whole range in my truck.

Lead, follow, or get out of the way

b1llyw
GenIII
 Email User Profile


4/13/2005
13:55:29

RE: KRC 200 cams or KRC 206 cams
IP: Logged

Message:
I own KRC along with Marty and I have HO cams in my own 4.7 4x4. 206's are a great choice and do make a bit more power but bang for the buck, you can't beat the 200's.

Bill White - KRC Performance
'02 QC Sport Plus, 4x4, 4.7, 5spd, 3.55 LSD, Leather, Sirius, 180 t-stat, NGK 2262's, KYB Gas-A-Just Shocks, MBRP Stainless Split Duals, Superchips, HO Cams, MP Air Filter

Izzy
Dodge Dakota
JOIN HERE
 Email

4/14/2005
09:22:27

RE: KRC 200 cams or KRC 206 cams
IP: Logged

Message:
DSW, I have the 200's (HO cams) and had Marty put them in. He did it in like under 2 hours if I remember right but then again he knows that engine like the back of his hand.

Like I said above, I added a Superchips tuner to that and together they make me very happy.



Germ
Dodge Dakota
JOIN HERE
 Email

4/14/2005
11:42:39

RE: KRC 200 cams or KRC 206 cams
IP: Logged

Message:
'Bout what are ya'll paying for a decent set of cams? I'm thinking of doing a true dual exhaust, headers, and a new set of cams sometime in the near future when I have money. I was looking on Summit and the prices ranged from like $100 - $800.



GraphiteDak
GenIII
 Email User Profile


4/15/2005
00:39:51

RE: KRC 200 cams or KRC 206 cams
IP: Logged

Message:
Hey billy. Since you guys probably know alot about them 4.7's by now I thought I'd ask how bullet proof they seem to be as far as building them up with a stock bottom end and all.
Are they as strong as the old 318's?





Izzy
Dodge Dakota
JOIN HERE
 Email

4/15/2005
14:22:24

RE: KRC 200 cams or KRC 206 cams
IP: Logged

Message:
Germ,
After tax, I paid in the neighborhood of $267 and some change for the KRC 200's but they have gone up in price since then. I think they are just over $300 now but after seeing the difference they made on my 104k mile truck, I would have paid over 300 anyway.




b1llyw
GenIII
 Email User Profile


4/15/2005
14:24:53

RE: KRC 200 cams or KRC 206 cams
IP: Logged

Message:
The 4.7 is pretty strong. Factory pistons are a weak point, as they were on the 318/360 when you run boost or spray.

Bill White - KRC Performance
'02 QC Sport Plus, 4x4, 4.7, 5spd, 3.55 LSD, Leather, Sirius, 180 t-stat, NGK 2262's, KYB Gas-A-Just Shocks, MBRP Stainless Split Duals, Superchips, HO Cams, MP Air Filter

   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.