From | Message |
Darren Dodge Dakota JOIN HERE
3/08/2005 22:29:33
|
Subject: msd VS. accel IP: Logged
Message: what is the best ignition coil for a 3.9 2002 dak.
|
Sneezer Dodge Dakota JOIN HERE
3/09/2005 09:47:44
| RE: msd VS. accel IP: Logged
Message: MSD. Too many people have had the Accel fail on them. You can get the direct fit MSD replacement or a BlasterSS coil. The SS coil works pretty good IMO.
|
mike m Dodge Dakota JOIN HERE
3/09/2005 20:58:48
| RE: msd VS. accel IP: Logged
Message: what does a good coil vs a stock coil do better?
what would you notice performance wise.
|
Sneezer Dodge Dakota JOIN HERE
3/10/2005 10:16:35
| RE: msd VS. accel IP: Logged
Message: If you are stock, you will not notice a thing. A better coil has more spark, which translates into a better combustion burn. It really does not make that much of a difference until you are heavily modded or running boost/spray. At that point you also need an ignition contoller.
I have an SS coil and 6AL on my truck. I did not notice much of a power gain at all. It did smooth the idle out a great deal though, and seemed to rev a tad quicker.
|
Darren Dodge Dakota JOIN HERE
3/10/2005 18:23:33
| RE: msd VS. accel IP: Logged
Message: what is the part number for the ss coil.
is there one for 3.9 2002 dak.
do you need the harness also.
|
Darren Dodge Dakota JOIN HERE
3/10/2005 19:11:35
| RE: msd VS. accel IP: Logged
Message: how do you hook up the ss coil for the 3.9 dak 2002
|
Sneezer Dodge Dakota JOIN HERE
3/11/2005 09:56:41
| RE: msd VS. accel IP: Logged
Message: http://www.msdignition.com/coil_blaster_6_8207.htm
If you are only hooking up a coil, it is just 2 wires. Snip the ones going to the stock coil and hook them up to the new one. It uses blade terminals. If you want you can pick up a couple 2-wire flat pack trailer wiring connectors. They make a decent quick release connection so you can go back to stock should you need to.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|