From | Message |
jason_02sxt Dodge Dakota JOIN HERE
3/02/2005 17:45:37
|
Subject: which gears? IP: Logged
Message: i want to get more "acceleration" out of my 3.9 v6. i've done a little bit of reading on replacing the ring gear and pinion and not sure which to go with. i have the 3.55 (8.25") gears and i want to know which to go with, the 3.92 or the 4.10? is there a big difference between the two? if anybody knows of any other cheap mods that improves acceleration, pls let me know!
|
.boB Dodge Dakota JOIN HERE
3/02/2005 19:36:21
| RE: which gears? IP: Logged
Message: Gears are your best bang for the buck. As to which is better and how much differance there is between, I'd need to know more. I particular, tire size and trans type.
|
jason_02sxt Dodge Dakota JOIN HERE
3/03/2005 07:52:56
| RE: which gears? IP: Logged
Message: i am new at this so bare with me. i have a 5 speed manual and tires are 255/65r16. if this helps, i also have a k&n air filter and a flowmaster 40 series deltaflow.
|
b1llyw GenIII
3/03/2005 09:57:04
| RE: which gears? IP: Logged
Message: There isn't a whole lot of difference between 3.92 and 4.10. If you are going to spend the money, I'd get the 4.10's and get that extra bump.
Bill White - KRC Performance '02 QC, 4x4, 4.7, 5spd stick, 3.55 LSD, Leather, Sirius, 180 t-stat, NGK 2262's
|
b1llyw GenIII
3/03/2005 09:57:53
| RE: which gears? IP: Logged
Message: There isn't a whole lot of difference between 3.92 and 4.10. If you are going to spend the money, I'd get the 4.10's and get that extra bump.
Bill White - KRC Performance '02 QC, 4x4, 4.7, 5spd stick, 3.55 LSD, Leather, Sirius, 180 t-stat, NGK 2262's
|
.boB Dodge Dakota JOIN HERE
3/03/2005 20:34:58
| RE: which gears? IP: Logged
Message: OK, here's out it works out. As far as I can find out, your 5 speed has a 4.01 first gear and a 0.73 5th gear. If you assume a 29.1" tire and a 2500 shift point, here's what your speeds would be:
.......3.55.....3.92.....4.10
1st....15.2.....13.7.....13.1
5th....83.5.....75.6.....72.3
|
cj Dodge Dakota JOIN HERE
3/09/2005 19:37:43
| RE: which gears? IP: Logged
Message: my grandpa has a 98 dakota v-6 with the 3.55 rear end.. I have a 99 Dakota 4x4 with the 3.9, and the guy i bought it from ordered the factory 3.92 rear end, and it did make a difference and it helps alot considering its the 3.9. I'd say either one you can get for the cheapest, but you'll love the difference. 3.55 = sluggish for the 3.9
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|