| From | Message |
billiy
Dodge Dakota
JOIN HERE
1/31/2005
13:01:47
|
 Subject: single plain intake
IP: Logged
Message:
any one make a single plane intake for a 93 318 that would give good low end dont want to put a m1 on my 4x4 put would like to get the 2 part junk out
|
Sneezer
Dodge Dakota
JOIN HERE
1/31/2005
14:14:18
| RE: single plain intake
IP: Logged
Message:
Sorry, you are out of luck. M1 is really the only game in town. You can get the 4bbl version and use an adapter plate to use your existing 2bbl TB, but that still won't help with torque. No one else makes one for the magnum. Your only other option for more torque is to pull your intake, cut down the runners and polish it up a little, then install a billet belly pan from APS or Hughes.
|
Geezer
Dodge Dakota
JOIN HERE
1/31/2005
15:04:48
| RE: single plain intake
IP: Logged
Message:
is a 1993 318 a magnum motor?
|
Sneezer
Dodge Dakota
JOIN HERE
2/01/2005
09:17:50
| RE: single plain intake
IP: Logged
Message:
318 magnums started in 92. 360 in 93.
|
daddio
Dodge Dakota
JOIN HERE
2/01/2005
11:21:59
| RE: single plain intake
IP: Logged
Message:
billiy, single plane intakes are for upper rpm perf. you want a dual for low end torque & perf.
|
Zach
Dodge Dakota
JOIN HERE
2/01/2005
11:44:00
| RE: single plain intake
IP: Logged
Message:
The only other option that I can thing of is getting a ported stocker from Hughes.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
