| From | Message |
racernj
Dodge Dakota
JOIN HERE
12/23/2004
17:34:32
|
 Subject: H.O cams and intake
IP: Logged
Message:
Hey guys
What can I expect from H.O cams and intake on a 2002 4.7/Auto. I have Gibson headers/cat-back and K&N FIPK. I havent touched the ECU yet and may not. Tell me what you know
|
What I know
Dodge Dakota
JOIN HERE
12/23/2004
20:10:39
|  RE: H.O cams and intake
IP: Logged
Message:
I know there already a Metric buttload of posts on this board on that subject.
If you would bother to look around first....
|
dude
Dodge Dakota
JOIN HERE
12/24/2004
13:04:55
| RE: H.O cams and intake
IP: Logged
Message:
I've heard 20-30 horsepower
|
TexasTodd
Dodge Dakota
JOIN HERE
12/25/2004
14:37:53
| RE: H.O cams and intake
IP: Logged
Message:
Headers? Still run any cats? Is this a true dual,, or does it go to one?
|
racernj
Dodge Dakota
JOIN HERE
12/25/2004
20:29:01
| RE: H.O cams and intake
IP: Logged
Message:
It is a Gibson setup with headers and a single 3" catback. Still has cat.
|
TexasTodd
Dodge Dakota
JOIN HERE
12/26/2004
16:21:56
| RE: H.O cams and intake
IP: Logged
Message:
How many cats? My 01, 4.7 had three, the large one without the O2 sensors mysteriously disappeared from my truck. It's alot louder with the stock muffler still in place.
Do you have any before and after dyno's?
I guess you know what people say about the stock headers?
|
01Motorsport
Dodge Dakota
JOIN HERE
12/30/2004
23:17:03
| RE: H.O cams and intake
IP: Logged
Message:
FlDak's dyno results showed 15HP/25TQ with the HO cams and a stock non-HO intake. The real kicker was a "sweet spot" in the power band around 3400 rpm delivering a 25HP/45TQ improvement. The HO intake shows improvement at slightly higher rpm at the expense of low end torque.
|
Check it out
Dodge Dakota
JOIN HERE
12/31/2004
00:04:36
| RE: H.O cams and intake
IP: Logged
Message:
Here's more good info.
https://www.dodgedakota.net/boards/gen/12275.html
|
racernj
Dodge Dakota
JOIN HERE
1/06/2005
00:56:29
| RE: H.O cams and intake
IP: Logged
Message:
Thanks for the info--Any more user results would be helpful
|
Kowalski
GenIII
1/06/2005
14:48:22
| RE: H.O cams and intake
IP: Logged
Message:
The cams alone will give you most of the torque increase of the HO package.
Lead, follow, or get out of the way
|
jasonsdakota
Dodge Dakota
JOIN HERE
1/07/2005
23:21:28
| RE: H.O cams and intake
IP: Logged
Message:
the cams give you the 'only' torque increase of that combination.
|
Kowalski
GenIII
1/08/2005
07:25:58
|  RE: H.O cams and intake
IP: Logged
Message:
jasons dakota - how do you figure that? You don't think a slight bump in compression would also increase torque ?
Lead, follow, or get out of the way
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
