| From | Message |
Wonderbread
Dodge Dakota
JOIN HERE
12/08/2004
01:47:05
|
 Subject: Throttle body for this setup?
IP: Logged
Message:
Hey i currently have a 98 5.2 CC 4x4 with a K&N GenII. Im about to be purchasing a M1 2bbl manifold and a F&B throttle body, but what im wondering is which size throttle body should i buy. Im pretty sure im gonna get the 50mm but i dont know because i might upgrade to ramair through using the shakers hood. I also plan on adding a MBRP cuda catback soon too. SO which size should i get 50mm? 52mm?
|
rtdkota
R/T
12/08/2004
10:54:28
| RE: Throttle body for this setup?
IP: Logged
Message:
50mm would be the way to go.. note the 2bbl will take some of the bottom end off.
Sam
www.socaldakota.com
|
b1llyw
R/T
12/08/2004
19:31:00
| RE: Throttle body for this setup?
IP: Logged
Message:
Sam's right. Stick to the 50mm on that setup.
Bill White - KRC Performance
'03 R/T, CC
'04 Liberty, 4x4, 3.7, 5-speed, LSD
|
Sneezer
Dodge Dakota
JOIN HERE
12/09/2004
15:46:49
| RE: Throttle body for this setup?
IP: Logged
Message:
Yep - 50mm would be what you need. The 318 really does not need anymore unless you are running a supercharger. Ram air/shaker hoods will not make enough of a difference to warrant moving to a 52mm.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
