Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
02:50:54 - 12/29/2024

Dakota Performance
FromMessage
99 KA-R/T
Dodge Dakota
JOIN HERE


10/21/2004
18:48:40

Subject: Poll: Do you rev to 5k
IP: Logged

Message:
Just wondering how many people run their engines to 5,000 rpm and above.?



spark plug
Dodge Dakota
JOIN HERE


10/21/2004
21:00:28

RE: Poll: Do you rev to 5k
IP: Logged

Message:
i go to 6500, trw forged pistons, stock rods, arp rod bolts, stock crank



gen1dak
Dodge Dakota
JOIN HERE


10/21/2004
21:13:36

RE: Poll: Do you rev to 5k
IP: Logged

Message:
Revved my '69 318 to 5800 on a routine basis, and it had all stock bottom-end. Setting up the 360 Magnum for "stab-and-steer" at 5800....or just over 6 grand with manual control.



chris
Dodge Dakota
JOIN HERE
 Email

10/22/2004
01:09:06

RE: Poll: Do you rev to 5k
IP: Logged

Message:
5500rpms freqently

318 mopar headers, 3 inch exhaust, hi flow cat, ported tb,knn cold air,crane cam ingition



IntenseDak39
*GenIII*
 User Profile


10/22/2004
13:34:22

RE: Poll: Do you rev to 5k
IP: Logged

Message:
i rev my big block to 6000 rpms... makin' power the whole way there.

6.6 Lt. Big Block, 727 TF shift kit, 452 heads, edelbrock 750 cfm, .513/.513 284/300 crower cam, comp cams springs, comp cams pushrods, 1.5 roller rockers, dp intake, mopar ignition, mopar windage tray, dual exhaust w/ 40 series flowmasters, 4.10 gears, coilover drag suspension, approx, 3500 lbs

Thumper
Dodge Dakota
JOIN HERE


10/22/2004
15:47:03

RE: Poll: Do you rev to 5k
IP: Logged

Message:
Its all in the way there biult. I have a 360 being biult at the moment for my dakota and would be able to take 8000 all day long.The old 4.7 thats in it right now never went over the rev limiter.


"speed costs money how fast you wanna go?"



Kowalski
GenIII
 User Profile


10/22/2004
16:20:43

RE: Poll: Do you rev to 5k
IP: Logged

Message:
What's that rev limit on your 4.7 ? This one sees 5500.

Lead, follow, or get out of the way

Science Guy
Dodge Dakota
JOIN HERE


10/22/2004
17:01:15

RE: Poll: Do you rev to 5k
IP: Logged

Message:
The average joe doesn't have a "nascar" type motor in their dak. And how many people do you know zing their stock motors past 5000 rpm's and keep it above that rpm range for an extended time?



GraphiteDak
GenIII
 Email User Profile


10/22/2004
17:11:03

RE: Poll: Do you rev to 5k
IP: Logged

Message:
I take mine just to the rev limiter about every time I drive it.
Seems to hit about 5800 when the limiter stops me :-(
I bet the 4.7 could do 6500 easy on stock internals. WHen they come out with a programmer I'll move mine to 6500. Now of course I never hold mine at redline. But slipping and sliding in 4 wheel mine's stayed above 5K for 10~20 seconds many of times.

What's nice about the new tranny behind the 4.7 is it must learn your driving habits somewhat.
I can give mine half throttle from a light and it will go past 4K easy. 3/4 throttle and it goes past 5k. It's kind of nice to have a tranny that lets you wind out the gears a little without having to floor it.



Kowalski
GenIII
 User Profile


10/22/2004
17:23:50

RE: Poll: Do you rev to 5k
IP: Logged

Message:
Are you sure that's a rev limiter ? I thought it was just where the auto tranny shifts when running wfo. Never held it in gear looking for more revs to really know.

Lead, follow, or get out of the way

99 KA R/T
Dodge Dakota
JOIN HERE


10/22/2004
18:56:45

RE: Poll: Do you rev to 5k
IP: Logged

Message:
I have had this thing for about six months and run it to 6k and just over 3 to 4 times a week going through the gears. Everything seams fine I am very religous about service. Another 100 hp would be nice. Maybe one day



TexasTodd
Dodge Dakota
JOIN HERE
 Email

10/22/2004
23:48:17

RE: Poll: Do you rev to 5k
IP: Logged

Message:
I take my 4.7 to 6 in the any of the first three gears, about once a week. With the light mods I have, it pulls to there! I do have the 5 speed, manual.

If you have an auto, I guess you could do the same thing, right, shift it manually I mean.



Thumper
Dodge Dakota
JOIN HERE


10/23/2004
01:31:16

RE: Poll: Do you rev to 5k
IP: Logged

Message:
yes,but to hit 6000 in 3rd we would be doing like 98 and hit the governor which would shut us down...lol. As for us taking our 4.7's to 6500 i just dont know about very much of that. A good biult motor could bearly take 7000 alot. When i take my 4.7 to the limiter which seems like about 5800 maybe 5900, but when it gets up past 5000 it doesnt really seem to pull very hard i guess its the low t/hp that the 4.7's have i just dont think they'll be any good to 6500



daffydak
GenIII
 User Profile


10/23/2004
02:16:29

RE: Poll: Do you rev to 5k
IP: Logged

Message:
i have taken my 4.7L to 6200 (rev limiter) by holding it manualy in 1st or second. I only did this 2 times, and I don't plan on doing it again LOL!! I think the OHC design, should be able to take the revs no problem...My 45RFE shifts on it's own at about 5500 rpms....

00 CC Sport Plus 4.7L 4X4 Auto, 3:55 LSD
Flowmaster orig. 40 series (2 chamber) muffler, adjusted tps to .76V, ported TB, home brew intake setup w/K&N filter, more mods to come!!!

Dan

MOPAR=More Power!!

Kowalski
GenIII
 User Profile


10/23/2004
07:09:54

RE: Poll: Do you rev to 5k
IP: Logged

Message:
The other thing about the 4.7 that allows it to rev well is that it has lighter reciprocating parts than the other motors. There are hotter cams available for those who want to be still making power at 6k.

Lead, follow, or get out of the way

99 KA R/T
Dodge Dakota
JOIN HERE


10/23/2004
08:48:39

RE: Poll: Do you rev to 5k
IP: Logged

Message:
I have a Mopar PCM so getting to 6k is not a problem. I was kind of vague, I rev it to just over 6k and have had it to 110 but I dont max third gear at those rpm's. How high will the performance pcm let you take it, both in revs and in speed.?



GraphiteDak
GenIII
 Email User Profile


10/23/2004
22:14:00

RE: Poll: Do you rev to 5k
IP: Logged

Message:
With my cam swap and TB porting mine pulls all the way to where it hits the limiter.

Now that the power doesn't drop like it kind of did stock I have hit my rev limiter (when shifting manually) because it is still pulling.

I know what the rev limiter is like. I have taken every vehicle to the rev limiter that I have had. And the cars without them I drove until the valves floated!



TexasTodd
Dodge Dakota
JOIN HERE
 Email

10/24/2004
13:47:35

RE: Poll: Do you rev to 5k
IP: Logged

Message:
Thumper,

You have the 99mph limiter? What a bummer.

My 2001, 4.7, 5speed manual, with the tire and handling pack, etc. has the 118! And it's a Quad Cab.



kj
Dodge Dakota
JOIN HERE


10/24/2004
14:12:38

RE: Poll: Do you rev to 5k
IP: Logged

Message:
My 4.7 hit 5300 twice in passing gear going up hills. It rarely sees over 3500 ninety-nine percent of the time.



Thumper
Dodge Dakota
JOIN HERE


10/25/2004
00:03:51

RE: Poll: Do you rev to 5k
IP: Logged

Message:
yes,but i bypass it alot of the time.



GraphiteDak
GenIII
 Email User Profile


10/25/2004
00:20:10

RE: Poll: Do you rev to 5k
IP: Logged

Message:
I just came home from eating out. I gave the truck 1/4 to 1/3 throttle from each light and it shifts from 1st to 2nd at about 4500 to 5000 RPM's.
1/2 throttle shifts about 5100 or so. Maybe it's my driving habits that gives me the later shift times. I like the shifts. Maybe the TPS tweak helps as well. Dunno. I modded my TPS when I got the truck new.



   P 1 Next Page>>


 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.