Forums
Forum Tools
|
 |
03:31:59 - 12/29/2024
Dakota Performance
| From | Message |
N56629
Dodge Dakota
JOIN HERE
10/10/2004
12:00:50
|
 Subject: K&N 85-1060
IP: Logged
Message:
Anyone here have experience with this product?
http://www.motorhead.com/shop/parts/?pn=KNE-85-1060&i=a&l=4abm1
Description:
Cast aluminum plenum, beautifally finished with black powder coating and natural aluminum hightlights. The plenum is designed to fit most American 4 barrel carb the that a 5-1/8" flange. Also will fit the Weber DGV carburetor when used with K&N adapter 85-1061. Designed for cold air intake, plenum has a single snorkel outlet that can be fitted with a 4" flange I.D. hose running to a remote air filter. A K&N universal filter with a 4" flange can also be clamped directly on the snorkel as well. The outside diameter of the plenum is 9" and the snorkel sticks out 6" from the center of the plenum. Minimum clearance required above the carburetor flange is 3-1/8". Customer must provide 1/4-20 hold down stud.
NOTE: The customer plenum is recommended for small displacement engines (less than 200 CID) or low revving V6-V8 engines.If the engine requires more than 45 sq. in. of filter area, the the plenum shouldn't be used because the carburetor would have to be re-jetted and a loss of high rpm power will be the result. These filters are legal ONLY for racing vehicles. Not applicable, nor intended for use on emission controlled street or highway vehicles. These filters are not applicable, nor intended for use on aircraft.
I really don't understand the note.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
