| From | Message |
Eric
Dodge Dakota
JOIN HERE
9/14/2004
19:46:24
|
 Subject: question
IP: Logged
Message:
i have been researching for over a month now and i still can't find out if a NV3500 out of a ram will fit into my 93 2wd dakota. As soon as i find out i'm going to be buying one and a 360 and putting them in. Anyone please help
Thanks
Eric
|
.boB
Dodge Dakota
JOIN HERE
9/14/2004
23:28:55
|  RE: question
IP: Logged
Message:
Have you checked the Hollander Interchange Manual? My local library has one. Almost every bone yard has one, too.
|
?
Dodge Dakota
JOIN HERE
9/15/2004
09:33:26
| RE: question
IP: Logged
Message:
Some important things to remember.
Be sure to get complete mounts and other
hardware with anything to be added..
|
Tnjones
Dodge Dakota
JOIN HERE
9/15/2004
16:30:46
| RE: question
IP: Logged
Message:
Bad idea. The 4.7 pushes the NV3500 to it's max rated tork of 300ftlbs with only minor mods. The 360 will twist this tranny into shards in no time. It's not an issue of fit. It's a matter of strength.
New Venture is a joint Chrysler/GM project. The NV3500 is one of their products. Chevy had enough sense to only use this tranny behind V6's. Dodge, as usual, puts too much power through too little tranny. Sorry I don't have a better tranny to suggest, but bOB had the right idea with the Hollander Interchange Manual.
Let us know what combo you end up with.
|
Eric
Dodge Dakota
JOIN HERE
9/15/2004
19:43:06
| RE: question
IP: Logged
Message:
TNjones,
As far as i know the NV3500 came in the rams with the 5.2's. It is rated for 300 foot pounds of torque in a 7200 pound vehicle. I have heard or people putting over 500 hp and same torque and have gone through 2 rearends at the race track and there tranny is still in one peice. Anyone else got any comments?
Eric
|
eric
Dodge Dakota
JOIN HERE
9/15/2004
20:26:03
| RE: question
IP: Logged
Message:
Does anyone know anything about the NV4500 then? I'v read it comes behind the 5.2s and 5.9s. thanks
Eric
|
TexasTodd
Dodge Dakota
JOIN HERE
9/16/2004
12:59:48
|  RE: question
IP: Logged
Message:
As far as Torque on the tranny goes,
I think 'Duner' with his T/C 4.7 still has his nv3500 in one piece.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
