| From | Message |
Peter
Dodge Dakota
JOIN HERE
7/13/2004
08:15:18
|
 Subject: Mopar Camshaft
IP: Logged
Message:
How will perform that mopar cam "5007551" on my 99 Club Cab R/T that already has 1.7 roller rockers?
(For MPI Engines)
272/278dur/.467/.482lift
What is the power band for that cam?
It advertises 10 horses over the Magnum R/T Cam.
Peter.
|
mcarthey
Dodge Dakota
JOIN HERE
7/13/2004
09:51:02
| RE: Mopar Camshaft
IP: Logged
Message:
It'll have a rough idle with that duration (and, probably, overlap - have to know the seperation). For each 10 degree increase in duration, you can expect the RPM range to go up about 500rpm. Without knowing what you have now, I'd guess it'd be in the 4000+ rpm range.
|
Peter
Dodge Dakota
JOIN HERE
7/13/2004
11:50:35
| RE: Mopar Camshaft
IP: Logged
Message:
My R/T already has these Parts below:
.Powerdyne supercharger(9psi)with by pass valve
.M1
.Holley 52mm T.B
.1.7 Roller rockers
.Mopar CPU
.Mopar headers
.true(2.5inch)dual exhaust and no converters
.double flowmasters(40 series)
.Complete MSD ignition
.shift kit
I apreciate your help,
Peter.
|
janesy
Dodge Dakota
JOIN HERE
7/13/2004
16:56:31
| RE: Mopar Camshaft
IP: Logged
Message:
Only get the R/T cam if you are strickt about emissions. I am kinda disapointed in the performance of the cam. But i had high expectations going into the deal. and it is smooth as stock. powerband is good from 1500 to redline.
|
Peter
Dodge Dakota
JOIN HERE
7/14/2004
10:58:53
|  RE: Mopar Camshaft
IP: Logged
Message:
In my opinion It canīt be that smooth as the stock one, Janesy.
The "5007551" should be stronger than the R/T camshaft. Power band is suppose to be a little higher too, Donīt you think?
In fact , what Iīm looking for on this camshaft is more HP on the stock power band up to the redline(5250rpm)with the Mopar CPU.
Iīm thinking about 25HP more than the factory one does on our R/Tīs.
What Do you guys think about that?
Peter.
|
janesy
Dodge Dakota
JOIN HERE
7/14/2004
18:43:07
| RE: Mopar Camshaft
IP: Logged
Message:
Sorry bout that, i just though R/T cam for some reason. Ya your right the R/T 2 cam sould be a little rougher, I have heard the it does need to be run up high for power.
|
b1llyw
GenII
7/14/2004
19:45:53
| RE: Mopar Camshaft
IP: Logged
Message:
It makes a nice little combo with the 1.7's. Should run strong in your R/T. Won't hurt your bottom end very much. I have a customer running that combo in a big, heavy Ram and he's happy.
Bill White - KRC Performance
'95 CC 4x2 - 408, 5-speed, 8 3/4
'03 Neon R/T - No mods...yet
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
