| From | Message |
Alec
Dodge Dakota
JOIN HERE
7/07/2004
18:22:39
|
 Subject: Dynomax 17748
IP: Logged
Message:
I got my Dynomax Super Turbo on my 3.9 L, and its so much louder than stock. I was reading all the posts, and how it had a lower tone, but it waas as quiet as stock. Thats waht I wanted!!!! But my Truck sounds weird now, kinda ricey. And when it kicks into Overdrive, the drone that it makes on the highway is really annoying. Does anyone else have this problem?? Maybe I jsut have to wait 1000 miles, and it'll "burn it" and wont be so bad. But then again, it might get worse....
I looked at the install, and everything is welded well. The only thing I think might make a difference is that the offset is facing the front, and the middle opening is facing toward the back. I dotn think this really matters anyways, cuz i heard its the same both ways.
the only other thing i noticed is the piece of metal right above it vibrates a while when you hit it with ur hand, so I think mine might be loose or soemthing.
If anyone has any help, i would greatly appreciate it. Well, actually i really need it, hahaha.
|
prple-gaseatr
Dodge Dakota
JOIN HERE
7/07/2004
18:26:20
| RE: Dynomax 17748
IP: Logged
Message:
try fixing that metal piece it is probablly a rattling heat shield, as for the muffler, let it break in for a lil bit
|
Alec
Dodge Dakota
JOIN HERE
7/07/2004
18:55:35
| RE: Dynomax 17748
IP: Logged
Message:
ya, i was lookin at it again, and i think thats it. Just wonderin what i should do to make it tighter, or jsut dampen it.
|
Alec
Dodge Dakota
JOIN HERE
7/07/2004
20:49:27
| RE: Dynomax 17748
IP: Logged
Message:
please help
|
Alec
Dodge Dakota
JOIN HERE
7/07/2004
22:43:54
| RE: Dynomax 17748
IP: Logged
Message:
Sorry, i forgot to say 2000 Quad cab 3.9L V6.
|
boomer47
Dodge Dakota
JOIN HERE
7/10/2004
08:41:08
| RE: Dynomax 17748
IP: Logged
Message:
Same muffler, same droning noise.
I had the shop run the tailpipe straight out under the bumper instead of behind the rear wheel and put on a Hedman tip with a built in resonator in it.
Sounds good and the droning in the cab is gone.
Hedman# 17122
|
Dave B.
Dodge Dakota
JOIN HERE
7/10/2004
12:39:39
| RE: Dynomax 17748
IP: Logged
Message:
I just installed a Dynomax 17748 Muffler last weekend and I do believe that center inlet is the input side and the offset is the outlet side. I am not sure if these mufflers are omni-directional. I hope that helps.
Dave B.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
