| From | Message |
Jesse
Dodge Dakota
JOIN HERE
6/30/2004
18:06:49
|
 Subject: Q from Iraq
IP: Logged
Message:
I am stationed in Iraq right now and plan on having a friend do some work on my truck while I am gone. Since I am making tax free money I can actually afford to do some work for once. I already purchased a NX kit, Airaid intake, 70mm TB, and am looking at the HO Cams. I want to remove the speed and rev limiter and adjust the shift points. I know I can't Flash my PCM with nitrous though, so how do you get around this? It seems like everyone says you need a flash in order to really get the fullness of a mod. Will my PCM learn the new cams and TB?
|
jesse
Dodge Dakota
JOIN HERE
6/30/2004
18:22:50
| RE: Q from Iraq
IP: Logged
Message:
I guess it would help it I mentioned that I have a 2002 CC 4.7
|
another mark
Dodge Dakota
JOIN HERE
6/30/2004
23:51:54
| RE: Q from Iraq
IP: Logged
Message:
As someone who has done a lot of work on my magnum engine I would say you only need to flash your computer if you want someone to make a custom program for specific items you will put in/on the engine. You can just bolt on parts, reset the pcm with the negative battery cable/ignition key thing or just give the engine a couple hundred miles to relearn things. People with custom flashes usually supercharge or have done many out of the ordinary things. I've heard about $400 for a custom flash.
Hope you come back soon.
|
Old Fool
Dodge Dakota
JOIN HERE
7/01/2004
09:22:20
|  RE: Q from Iraq
IP: Logged
Message:
You can run NX with a custom flash. Check out KenneBell Optimizer II, I have run the Optimizer II since I have had 800 miles on my truck and I've run a 100 shot on it with no adverse effects. The price is $349 and the only way they will not raise the speed limiter is if you have the 98 mph one.
Later,
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
