| From | Message |
Mr.Sleepy
Dodge Dakota
JOIN HERE
6/28/2004
00:13:26
|
 Subject: Who makes Cams for 4.7
IP: Logged
Message:
I want to put in a cam that is more aggressive than a HO cam, does anyone know who might make cams for the 4.7? I've tried Comp and Crane with no success.
|
CThomp
*GenIII*
6/28/2004
07:32:16
|  RE: Who makes Cams for 4.7
IP: Logged
Message:
krcperformance.com and the h.o. cams from DC.
|
Izzy
Dodge Dakota
JOIN HERE
6/28/2004
10:21:09
| RE: Who makes Cams for 4.7
IP: Logged
Message:
KRC cams
|
Paul
Dodge Dakota
JOIN HERE
6/28/2004
12:56:46
| RE: Who makes Cams for 4.7
IP: Logged
Message:
The KRC 212 cams are an awesome set of cams. When you hit 3000rpms it feels like you hit some nitrous and they pull well beyond the rev limiter.
Paul
|
Mr.Sleepy
Dodge Dakota
JOIN HERE
6/28/2004
14:24:41
| RE: Who makes Cams for 4.7
IP: Logged
Message:
yes but doesnt the 212's require new lifters and springs? I was looking get some drop in cams but more agressive than the HO types. Am I dreaming? Or do I have to actually get more in depth with the installation to get what I want.
|
lacent
Dodge Dakota
JOIN HERE
6/28/2004
14:31:27
| RE: Who makes Cams for 4.7
IP: Logged
Message:
dont let springs and lash caps bother you man, its not hard, and just to let you know...yes if you get a bigger cam than the H.O. you should change your springs, just be sure to get an air hose attachment for your sparkplug hole and a magnet to help you catch the keepers
|
Paul
Dodge Dakota
JOIN HERE
6/28/2004
17:16:38
| RE: Who makes Cams for 4.7
IP: Logged
Message:
The guys at KRC told me the springs were not a 100% must since I only had 1000 miles on at the time. I'm sure theyll tell you the same thing and the lash caps install adds literaly 5 extra minutes. It's so worth it.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
