Forums
Forum Tools
|
 |
03:06:49 - 12/29/2024
Dakota Performance
| From | Message |
Cyalume
Dodge Dakota
JOIN HERE
6/08/2004
00:11:12
|
 Subject: 3.9 to 5.9 swap
IP: Logged
Message:
I started my automotive training this summer at a local technical college. As a project, Im looking to buy a used 5.9, rebuild it, and it into my 3.9 97 Dak. I know I will need to get the engine, transmission, computer, things like that. Can anyone foresee any problems doing this? Im sure someone has done this before, and Im curious if it is as easy as pulling the stock engine and setting the new one in. Any input is well appreciated.
Thanks guys!
|
IntenseDak39
*GenIII*
6/08/2004
00:15:22
|  RE: 3.9 to 5.9 swap
IP: Logged
Message:
besure to get a tranny for a 97 and older (not sure how old it will take though) because your speed sensor is in the tranny and the 1998 and newer are in the axle.
Since a 5.9 wasnt offered in a 1997 Dakota, you will need the computer for a 97 5.9 Ram.
6.6 Lt. Big Block, 727 TF shift kit, 452 heads, edelbrock 750 cfm, .513/.513 284/300 crower cam, comp cams springs, comp cams pushrods, 1.5 roller rockers, dp intake, mopar ignition, mopar windage tray, dual exhaust w/ 40 series flowmasters, 4.10 gears, coilover drag suspension, approx, 3500 lbs
|
Cyalume
Dodge Dakota
JOIN HERE
6/11/2004
15:29:21
| RE: 3.9 to 5.9 swap
IP: Logged
Message:
Any one else have any thoughts on this?
|
ollie
Dodge Dakota
JOIN HERE
6/13/2004
09:46:49
| RE: 3.9 to 5.9 swap
IP: Logged
Message:
i did a 3.9 to 5.2 in my 93 and im always still trying to work out the bugs but you will also have to change the fuel pump and if you run in to a problem with the wiring harness i just took my 3.9 harness and add in the other twwo injectors and used the 5.2 computer becuse some of the the plugs were different any other problems just write back and ill do my best t help go luck
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
