| From | Message |
OffRoad322
Dodge Dakota
6/14/2001
18:04:29
|
 Subject: Plug Wire Loom
IP: Logged
Message:
I have a 1997 Dodge Dakota with a 3.9L V6. I just got the Borg Warner Cap and Rotor and yesterday I received my MSD 8.5mm Super Conductor Plug Wires, but they won't fit in my stock wire looms.
Does anyone have any suggestions for new looms that will be easy to put in (no valve cover removal). Maybe even put them in the stock spots. But I need them to hold the 8.5mm size wires instead of the stock 7mm.
Any pictures of peoples truck would be cool and suggestions with part numbers for brands.
|
Kris239
Gen II
6/15/2001
13:31:08
|  RE: Plug Wire Loom
IP: Logged
Message:
What I did when I got my Taylor 8mm wires was go to your local auto parts store. Most of them will have some aftermarket parts like Mr. Gasket, etc. I went and bought a couple of bigger wire organizers. The actual wire loom is the plastic wire sleeve around the wire. I know my "holders" can only hold no bigger than 8mm, but I've seen some for bigger wires. Give it a try.
Kris Harnack
1994 Dodge Dakota SLT
3.9L V6 / RC / SB / Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
