| From | Message |
Jeremy
Dodge Dakota
JOIN HERE
5/02/2004
13:15:27
|
 Subject: Intake positioning
IP: Logged
Message:
I recently put an Airaid intake on my 4.7, and I love it. It replaces the airbox lid and filter and clips onto the bottom half of the stock box. My question is, I removed that horn-like tube from the front of the box, b/c I fig'd it would get more air that way. I was wonderin whether I was correct or should I just leave that piece on or what? Is it just gonna get hot air?
|
aj
Dodge Dakota
JOIN HERE
6/05/2004
21:43:51
| RE: Intake positioning
IP: Logged
Message:
slide a fennco 4" no hub over the hole. It is flexible rubber and will fit right around the oval hole. Make sure you tighten the metal clamp once you put it on. You can get one at Home Depot or Orchard Supply, 7 dollars.
|
?
Dodge Dakota
JOIN HERE
6/07/2004
15:27:33
| RE: Intake positioning
IP: Logged
Message:
As above -=- otherwise you/it is
sucking HOT air= bad........
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
