| From | Message |
KBJeep
Dodge Dakota
JOIN HERE
5/01/2004
15:35:44
|
 Subject: Removing Kenne Bell Optimizer to SMT-6
IP: Logged
Message:
Has anyone here done this? I want to remove the Optimizer and the boost-a-pump as there isnt much you can do to these parts. I'm going to replace the optimizer with the smt-6 and the boost-a-pump with a new holley fuel pump and new injectors.
|
WILLIAM N.
Dodge Dakota
JOIN HERE
5/02/2004
13:22:54
|  RE: Removing Kenne Bell Optimizer to SMT-6
IP: Logged
Message:
BE EXTRENELY CAREFUL WHEN REPLACING INJECTORS. I NEEDED A LITTLE LARGED INJECTORS ON MY 2001 DAKOTA. A LONG STORY SORT, I THOUGHT I DID EVERY THING PASSIBLE TO MAKE SURE THEY WOULD WORK. TECH ERROR AT JC WHITTNEY CAUSED ME A WHOLE BUNCH OF PROBLEMS AS THE WIER HANES WOULD NOT HOOK UP. JC WHITNEY MADE IT ALL RIGHT. FINANCIALLY, BUT IT DID CAUSE ME LOTS OF TIME AND SOME PROBLEMS.
|
KBJeep
Dodge Dakota
JOIN HERE
5/02/2004
13:36:21
| RE: Removing Kenne Bell Optimizer to SMT-6
IP: Logged
Message:
so you removed the optimizer and are using the smt-6 right now? what did you do to make the switch?
|
canadatom
Dodge Dakota
JOIN HERE
5/02/2004
13:42:06
| RE: Removing Kenne Bell Optimizer to SMT-6
IP: Logged
Message:
Are you going to use the smt-6 to control extra injectors ?
I have been using the smt-6 now for a year, mostly for timing control under boost but plan on using it to control extra injectors instead of the fmu that comes with the powerdyne s/c.
I would like to get the paxton airhat with injectors but paxton wants $1300.00
I talked with canspeed (canadian distributor for smt) and they said they had good luck using a NOS fuel solenoid & jet instead of injectors.
Let me know how you make out.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
