| From | Message |
kev
Dodge Dakota
JOIN HERE
4/24/2004
20:41:19
|
 Subject: intake
IP: Logged
Message:
Has anyone ever tried a dual style air intake such as the one on ebay. see the link below, if it doesn't work do a search on there and you'll see it. just wondering if it was any good, i gotta get my r/t breathing.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2474807105&category=38634&sspagename=STRK%3AMEBWA%3AIT&rd=1
|
kev
Dodge Dakota
JOIN HERE
4/25/2004
02:08:08
|  RE: intake
IP: Logged
Message:
anyone have any thoughts on this? if not, what intake is best? i found a site www.ajusa.com (i think) that sells aem brute force intakes that come with the bs t-body spacer for around $200.00 even. anyone use the brute force? is there really that much difference between any of the cold air intakes out there? thanks
|
Slow Guy
Dodge Dakota
JOIN HERE
4/25/2004
13:14:16
| RE: intake
IP: Logged
Message:
K&N FIPK is the best for R/Ts.
|
kev
Dodge Dakota
JOIN HERE
4/25/2004
13:28:20
| RE: intake
IP: Logged
Message:
is that based on dyno runs or personal anecdotes? thanks
|
hi
Dodge Dakota
JOIN HERE
4/25/2004
16:51:57
| RE: intake
IP: Logged
Message:
both
|
kev
Dodge Dakota
JOIN HERE
4/25/2004
22:06:20
| RE: intake
IP: Logged
Message:
did anyone look at the ebay item? any thoughts?
|
Matt
Dodge Dakota
JOIN HERE
4/25/2004
22:14:21
| RE: intake
IP: Logged
Message:
That set up is made for people with the true ram air hoods with dual scoops. If you don't have scoops to let in fresh cold air, then they will just suck in hot air trapped above the manifold. If you have the stock hood, go with the FIPK stype intake. It places the filter in a naturally cool area of the engine. Also pulling out that rubber panel next to the radiator and AC lines helps to feed the filter cold air.
I personally think the K&N kit is over priced. I have a 360 intake and it is pimp, also half the cost. Noticed a fairly good gain from it once the computer figured out it was there.
|
KEV
Dodge Dakota
JOIN HERE
4/26/2004
08:14:56
| RE: intake
IP: Logged
Message:
THANKS FOR THE INFO. MAYBE I'LL JUST HAVE TO GET THE RAM AIR HOOD.....
|
dak01
Dodge Dakota
JOIN HERE
4/26/2004
08:34:29
| RE: intake
IP: Logged
Message:
i don't think that set up is for a ram air hood. ram air set ups have are sealed. the hood seals to the air inlet. i don't know about that particular intake but, it should be o.k. if need be just extend it forward or out farther. just my two cents.
|
kev
Dodge Dakota
JOIN HERE
4/26/2004
12:33:32
| RE: intake
IP: Logged
Message:
any more thoughts from anyone on this subject? getting ancy to make a move. thanks
|
dakker
Dodge Dakota
JOIN HERE
4/26/2004
14:09:40
| RE: intake
IP: Logged
Message:
what if you bought that intake and got the heatshields they sell for conical filters?
|
Slow Guy
Dodge Dakota
JOIN HERE
4/26/2004
16:45:20
| RE: intake
IP: Logged
Message:
I think it looks great, but don't know if it'll compete with the K&N. My experience is based personally w/ the K&N. KRC says it's worth 12-15 at the wheels.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
