| From | Message |
90dak
Dodge Dakota
JOIN HERE
3/15/2004
12:55:12
|
 Subject: stage 2 jet chip questions
IP: Logged
Message:
OK i wnated to know how well the stage 2 jet chip will work on my truck. I have a 3.9 V6 1990 dodge dakota with a few mods I have a 40 series flowmaster exhaust, Accle super stack performance& accle 8mm performance wires, and a 3inch ram air intake i made from scratch. I was woundering how much the chip would help. I am getting headers soon. And one other question where do i install it since my ECU is uynder my hood i dont see where they say to install please help !!!
|
another mark
Dodge Dakota
JOIN HERE
3/15/2004
15:29:18
|  RE: stage 2 jet chip questions
IP: Logged
Message:
It connects in series with one of the main harnesses going to the
ECU at least that's how it connects on the 3rd gen Daks. The
unit is only about 1.5 inches in depth. I have a 99 3.9 and
frankly I didn't see a whole lot of difference, it pulled harder
beyond 3000 to redline but that's about all I could tell. The
stage 2 requires a 180 thermo and you should only use medium
grade or better gas otherwise you will be in ping city.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
