| From | Message |
LiL RIPPER
Dodge Dakota
JOIN HERE
4/23/2003
02:26:12
|
 Subject: 31s or 32s on a 1992 Dakota
IP: Logged
Message:
I have a 92 Dakota with a 3" body lift and I am running 30s right now, but I want something bigger. I have seen a stock 92 Dakota with 32s on it. So I am thinking that my Dakota has plenty of wheel well room to run 31s or 32s. The only place that the tire comes close to rubbing is on the front of the tire aganist the frame when steering the tires all the way. So I was thinking if I could find a rim that offsets the tire to the outside of the truck or run wheel spacers I should be ok to run 31s or 32s. But I just need more info to see if this works. Any help.
|
BAD360RT
Dodge Dakota
JOIN HERE
4/23/2003
08:09:58
| RE: 31s or 32s on a 1992 Dakota
IP: Logged
Message:
I had 32x11.50R15 BFG MT KM's on my '93 Dak, with a 3" body lift. I also had the torsion bars cranked about an inch or so, just enough to make the truck sit level. I trimmed just a bit off the backside of the front fenderwells cause they were cutting into the tires offroad. I was running AR 767's, not sure on the backspacing tho, but I didn't have any rubbing on the frame.
-Dave
|
Joe E.
Dodge Dakota
JOIN HERE
4/23/2003
20:10:56
| RE: 31s or 32s on a 1992 Dakota
IP: Logged
Message:
If you still have a pict of that 93 with the 32s, shoot me one at joelliott82@hotmail.com
Im thinking of doing some trimming the summer and getten some 32x11.50s
Thanks
Joe E.
|
LiL RIPPER
Dodge Dakota
JOIN HERE
4/24/2003
00:04:22
| RE: 31s or 32s on a 1992 Dakota
IP: Logged
Message:
I seen that dakota at a car lot for sale its long gone now, but I couldnt believe that 32s fit stock on his truck.
|
BAD360RT
Dodge Dakota
JOIN HERE
4/24/2003
00:56:58
| RE: 31s or 32s on a 1992 Dakota
IP: Logged
Message:
LilRipper, Yup, I had 31x10.50's on my '93 stock with no rubbing, so you could get 32's on there stock if you wanted to, but you'd rub, and you'd probably tear up your fenders offroad, but if you just wanted the look you could do it.
Joe, I'll send you a pic in a few, only have one, but you can see how it looks. I only had to trim maybe an inch off, and it was just the sharp corner on the bottom edge.
-Dave
|
Joe E.
Dodge Dakota
JOIN HERE
4/24/2003
16:16:51
| RE: 31s or 32s on a 1992 Dakota
IP: Logged
Message:
Thanks Dave, Ill be looking forward to it.
Joe E.
|
oats
Dodge Dakota
JOIN HERE
4/24/2003
17:12:07
| RE: 31s or 32s on a 1992 Dakota
IP: Logged
Message:
whats up man. i got a 96 with a 2 inch body and was thinking about trying 32 also. could you send me a pic too so i can see what it looks like. thanks peace
oats010@aol.com
|
Nick
Dodge Dakota
JOIN HERE
4/30/2003
15:07:19
| RE: 31s or 32s on a 1992 Dakota
IP: Logged
Message:
Ya alright i got a 91' dakota completely stock and i ran 31 10.50s and it doesnt rub i got stock wheels up front though. Ive loaded it with about 700 lbs of wood stumps went through some ditches and it still didnt rub so id say get emm especially if you got that 3'inch body
|
madmac9143
Dodge Dakota
JOIN HERE
4/30/2003
16:14:48
|  RE: 31s or 32s on a 1992 Dakota
IP: Logged
Message:
My 92 is running 31/10.5r15's with 99 dakota 15x8's. There has been no problems what so ever with this combo.
|
LiL RIPPER
Dodge Dakota
JOIN HERE
4/30/2003
20:15:32
|  RE: 31s or 32s on a 1992 Dakota
IP: Logged
Message:
Thats good to hear. I dont know what to get thinking about 32s, should look good when I get them. I just need to pick out some sweet wheels.
|
AndyW
Dodge Dakota
JOIN HERE
5/06/2003
10:49:23
| RE: 31s or 32s on a 1992 Dakota
IP: Logged
Message:
I have a 93 V-8 clubcab with a 2" body lift and I have 31's on the 15x8 newer Dakota wheels. I get a tab bit of rubbing if I am turning sharp in reverse but its only on the black plastic guard under the bumper. The turck sits like a truck now, I like it alot.
AndyW
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
