garwood
Dodge Dakota
JOIN HERE
12/22/2004
14:10:14
|
 Subject: Fan shroud removal
IP: Logged
Message:
Tried to remove my fan shroud to do some work on my 01 with 3.9L. Gingerly removed the top two nuts and then went to work on the one below the battery and compressor. Didn't seem to get anywhere and then noticed fluid leaking. The DC engineers decided to put the steel stud through to the overflow tank. I'd had enough and just put it back together. It's down to a drip now and then. Now the top studs spin even though I greased the threads. You can hold the stud with a 4mm socket and use a wrench, but just try and do that on the lower one. Just a warning to the rest of you.
|
